How to effectively remove the UFPs in air-return systems

Today much emphasis is given to dealing with ultra-fine particulates. These UFPs are smaller than 0.1μm, and when inhaled, penetrate deep into the lungs.

Awareness about ultra-fine particulates is essential, especially in air-return systems. Circulating air back into the manufacturing plant for energy recovery reasons requires adequate filtration and in many cases specialized solutions to prevent the concentration of UFPs from building up in the working area.

Sources of UFP dust

Fume-dominated work environments can have UFP concentrations of over 20,000 particles per cm3. Examples of these work environments are plastics, toner, and rubber production; adhesive spraying; and roofing production lines. There are also other sources of UFPs, like advanced powder and particulate processing. These kinds of processes include impact milling in the (animal) food industry or pigment, cosmetics, or pharmaceutical production.

How to effectively remove the UFPs in air-return systems
The JOA acoustic agglomeration module added to the existing filter unit, for effective removal of micropollutants in air-return systems.

Exposure limits for a healthy work environment

The EU considers 40 µg/m3 to be the recommended exposure limit for UFPs. The World Health Organization even sets the limit at 10 µg/m3. It is evident that innovative technology is needed to create a healthy, sustainable work environment. Furthermore, making “green” choices is imperative to effectively clean the returned air of UFPs. This makes the removal of indoor micropollutants generated in production areas or air that “escape” from air-return filters one of the most important objectives of the filter industry to provide good air quality in factories. Many air pollutants are considered very dangerous because of their ability to penetrate deep into the lungs. Lung-damaging dust can be as small as 0.5 μm and airborne bacteria can be as small as 0.3 μm. As most of the exposure to these pollutants occurs indoors, the challenge is to increase the efficiency of conventional filters so that they will be able to capture micropollutants.

Innovative solutions that allow existing filters to handle submicron particulates

Acoustic filter modules placed in front of existing air-return filters generate an ultrasound wave at about 21 kHz. By way of the orthokinetic and acoustic wave effects, particulates grow to a filterable size by colliding into one another, making the existing air-return filters much more effective. In combination with effective air conditioning (HVAC), adequate nuclei concentration is generated in order to increase the size of micropollutants and filter them out of the existing air-return filters, prior to releasing the return air into the production area.